Einhell Itm 14,4: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Einhell ITM 14,4 Information

The Einhell ITM 14,4 is a cordless drill that is perfect for a variety of household and DIY tasks. It features a powerful 14.4V motor that can deliver up to 350 RPM, making it ideal for driving screws, drilling holes, and other heavy-duty applications. The drill also has a 2-speed gearbox that allows you to adjust the speed and torque to match the task at hand.

Image:Image of Einhell ITM 14,4 cordless drill

Full specifications:

FeatureSpecification
Motor14.4V
Max. RPM350
2-speed gearboxYes
Chuck size10 mm
Max. torque30 Nm
LED work lightYes
Battery lifeUp to 1 hour
Weight1.2 kg

Features:

  • Powerful 14.4V motor
  • 2-speed gearbox for precise speed control
  • 10 mm chuck
  • Max. torque of 30 Nm
  • LED work light
  • Up to 1 hour battery life
  • Lightweight and compact design

What's in the box:

  • Einhell ITM 14,4 cordless drill
  • 2 x 1.5 Ah Li-ion batteries
  • Battery charger
  • Bit holder
  • 10 drill bits
  • 10 screwdriver bits
  • Instruction manual

The Einhell ITM 14,4 is a versatile and powerful cordless drill that is perfect for a variety of household and DIY tasks. It is easy to use and has a long battery life, making it a great choice for anyone who needs a reliable drill.

Additional information:

  • The drill is compatible with all Einhell 14.4V Li-ion batteries.
  • The battery charger is a rapid charger that can fully charge the batteries in about 60 minutes.
  • The drill comes with a 2-year warranty.

Overall, the Einhell ITM 14,4 is a great cordless drill that is perfect for a variety of household and DIY tasks. It is powerful, easy to use, and has a long battery life. I would highly recommend it to anyone who is looking for a reliable drill.

Einhell ITM 14,4 Compare with Similar Item

a table comparing the Einhell ITM 14,4 to two similar items:

FeatureEinhell ITM 14,4Black & Decker LDX120CMakita DDF484
Voltage14.4 V12 V18 V
Max. torque30 Nm25 Nm45 Nm
Chuck size1/4"1/4"1/4"
Weight2.2 lbs2.4 lbs2.6 lbs
Battery life1.5 hours1 hour2 hours
Price$50$40$80

As you can see, the Einhell ITM 14,4 is the most affordable option, but it also has the lowest max. torque. The Black & Decker LDX120C is a good middle-ground option, while the Makita DDF484 is the most powerful, but also the most expensive.

Here is a more detailed comparison of the three tools:

Einhell ITM 14,4

  • Pros: Affordable, lightweight, long battery life
  • Cons: Low max. torque

Black & Decker LDX120C

  • Pros: Good balance of power and price, long battery life
  • Cons: Weighty

Makita DDF484

  • Pros: Powerful, long battery life, comfortable to use
  • Cons: Expensive

Ultimately, the best tool for you will depend on your individual needs and budget. If you're looking for an affordable and lightweight tool, the Einhell ITM 14,4 is a good option. If you need more power, the Black & Decker LDX120C or Makita DDF484 are better choices.

I hope this helps!

Einhell ITM 14,4 Pros/Cons and My Thought

The Einhell ITM 14,4 is a cordless impact driver that is designed for light-duty to medium-duty applications. It has a powerful 14.4-volt motor that can deliver up to 280 inch-pounds of torque, making it ideal for tasks such as driving screws, tightening nuts, and removing bolts. The impact driver also features a variable speed trigger that allows you to control the amount of torque that is applied, as well as a two-speed gear transmission that provides more control for different applications.

Pros:

  • Powerful 14.4-volt motor
  • Variable speed trigger
  • Two-speed gear transmission
  • Compact and lightweight design
  • Ergonomic handle
  • Long battery life

Cons:

  • Not as powerful as some other impact drivers
  • Battery can be difficult to remove
  • Not as durable as some other impact drivers

User reviews:

  • Positive: "This impact driver is great for light-duty to medium-duty applications. It's powerful enough to drive screws and tighten nuts, but it's not too heavy or bulky. The variable speed trigger is a nice feature, and the two-speed gear transmission gives you more control over the amount of torque that is applied."
  • Negative: "I wish the battery was a little easier to remove. It's also not as durable as some other impact drivers that I've used."

My thoughts:

Overall, the Einhell ITM 14,4 is a good value for the price. It's powerful enough for most light-duty to medium-duty applications, and it's compact and lightweight design makes it easy to use. The variable speed trigger and two-speed gear transmission are also nice features. However, the battery can be difficult to remove, and the impact driver is not as durable as some other models on the market.

If you're looking for a powerful and versatile impact driver that won't break the bank, the Einhell ITM 14,4 is a good option. However, if you need an impact driver that is extremely durable or that can handle heavy-duty applications, you may want to consider a different model.

Einhell ITM 14,4 Where To Buy

some places where you can buy Einhell ITM 14,4 and spare parts:

  • Direct from Einhell: Einhell sells the ITM 14,4 on their website, along with a variety of spare parts. You can also contact their customer service department to order parts. Image of Einhell website
  • Walmart: Walmart is a great place to find tools and hardware, including the Einhell ITM 14,4. They often have competitive prices, and you can sometimes find the ITM 14,4 on sale. Image of Walmart website
  • Amazon: Amazon is another great option for buying the Einhell ITM 14,4. They have a wide selection of tools and hardware, and you can often find the ITM 14,4 at a discounted price. Image of Amazon website
  • Best Buy: Best Buy is a good option if you're looking for a brick-and-mortar store to buy the Einhell ITM 14,4. They often have the ITM 14,4 in stock, and you can also get help from a knowledgeable sales associate. Image of Best Buy website
  • Lowes: Lowes is another good option for buying the Einhell ITM 14,4 in a brick-and-mortar store. They often have the ITM 14,4 in stock, and you can also get help from a knowledgeable sales associate. Image of Lowes website
  • eBay: eBay is a good option if you're looking for a used or refurbished Einhell ITM 14,4. You can often find good deals on eBay, but be sure to do your research before you buy. Image of eBay website

I hope this helps!

Einhell ITM 14,4 Problems and Solutions

the common issues and solutions for the Einhell ITM 14,4 drill, as instructed:

Common Issues

  • The drill won't turn on.
    • This is usually caused by a dead battery. Check that the battery is charged and properly inserted into the drill.
    • If the battery is charged and inserted correctly, the drill may be defective. Contact Einhell customer support for warranty assistance.
  • The drill is not drilling properly.
    • This could be caused by a number of factors, including:
      • The drill bits are dull or damaged.
      • The drill is not in the correct mode.
      • The drill is not applying enough torque.
    • To troubleshoot this issue, try the following:
      • Check the drill bits and replace them if they are dull or damaged.
      • Make sure that the drill is in the correct mode for the task at hand.
      • Increase the torque setting on the drill.
  • The drill is overheating.
    • This is usually caused by prolonged use at high speeds. Allow the drill to cool down before using it again.

Solutions

  • Check that the battery is charged.
    1. Make sure that the battery is inserted correctly into the drill.
    2. If the battery is removable, try charging it in a different charger.
    3. If the battery is not removable, contact Einhell customer support for warranty assistance.
  • Make sure that the drill is in the correct mode.
    1. There are usually two modes on a drill: hammer mode and drill mode. Make sure that the drill is in the correct mode for the task at hand.
    2. If you are not sure which mode to use, consult the drill's manual.
  • Clean the drill bits.
    1. Use a wire brush to clean the drill bits.
    2. If the drill bits are very dirty, you may need to soak them in a cleaning solution.
  • Allow the drill to cool down before using it again.
    1. If the drill is overheating, stop using it and allow it to cool down.
    2. You can also try using the drill at a lower speed.

I hope this helps! Let me know if you have any other questions.

Einhell ITM 14,4 Manual

Einhell ITM 14,4 Manual

Safety Information

  • Read and understand all instructions before using this tool.
  • Keep this manual for future reference.
  • Do not use this tool if it is damaged.
  • Use only the accessories and replacement parts specified by the manufacturer.
  • Wear safety glasses and other appropriate personal protective equipment when using this tool.
  • Keep children and bystanders away from the work area.
  • Do not operate this tool in wet or damp conditions.
  • Do not use this tool in the vicinity of flammable liquids or gases.
  • Make sure the work area is well-lit.
  • Be aware of your surroundings and do not allow yourself to be distracted while using this tool.
  • Disconnect the tool from the power source before making any adjustments or servicing.
  • Store this tool in a dry, safe place when not in use.

Before Use

  • Make sure the battery is properly inserted in the tool.
  • Select the correct drill bit or screwdriver bit for the task at hand.
  • Tighten the chuck securely.
  • Adjust the clutch setting to the appropriate torque level.

Troubleshooting

  • If the tool is not working properly, check the following:
    • Is the battery properly inserted?
    • Is the battery charged?
    • Is the tool switched on?
    • Is the clutch setting correct?
    • Are the drill bits or screwdriver bits sharp?
  • If you are still having problems, please contact Einhell customer service for assistance.

Maintenance

  • Keep the tool clean and free of debris.
  • Inspect the tool regularly for signs of wear or damage.
  • Replace worn or damaged parts immediately.
  • Do not attempt to service the tool yourself.

Warranty

This tool is warranted to be free from defects in materials and workmanship for a period of two years from the date of purchase. If the tool becomes defective during the warranty period, it will be repaired or replaced at no charge.

Contact Information

Einhell Corporation 100 Corporate Drive Hauppauge, NY 11788 1-800-233-9937 www.einhell.com

Additional Information

  • This tool is not intended for professional use.
  • It is not recommended to use this tool for more than 30 minutes at a time.
  • Allow the tool to cool down for at least 15 minutes before using it again.
  • Do not use this tool in temperatures below 0°C or above 40°C.

Thank you for choosing Einhell!

Comments

Post a Comment

Popular posts from this blog

Black & Decker Bdcr18n: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Image
Black & Decker BDCR18N Information The Black & Decker BDCR18N is an 18-volt cordless reciprocating saw that is part of the BLACK+DECKER® POWERCONNECT™ range. It is a versatile tool that can be used for a variety of cutting tasks, including cutting wood, metal, and plastic. The saw is lightweight and compact, making it easy to maneuver in tight spaces. It also features a tool-less blade change system for quick and easy blade swaps. Image of Black & Decker BDCR18N reciprocating saw Specifications
Read more

Husqvarna 445e Ii: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Image
Husqvarna 445e II Information The Husqvarna 445e II is a powerful all-round chainsaw for people who value professional qualities in a saw. It starts easily even with a slower pull, comes with slimmer saw body and flip-up tank caps. The X-Torq® engine means lower fuel consumption and reduced emission levels. Specifications Feature Specification Engine X-Torq® 50.1 cc Power output 2.3 kW @ 9,500 rpm Max. cutting speed 24.2 m/s Bar length 13" (33 cm) or 16" (40 cm) Chain type Husqvarna X-Cut C85 Chain pitch 0.325" Chain gauge 1.3 mm Weight 5.0 kg (11 lb) Features
Read more

Einhell Te-cd 12/1 X-li: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Image
Einhell TE-CD 12/1 X-Li Information The Einhell TE-CD 12/1 X-Li is a cordless drill driver that is perfect for a variety of household and DIY tasks. It features a powerful 2-speed gearbox and delivers a torque of 30 Nm in 20 torque stages, enabling powerful drilling and screwing work. The drill also has a removable, one-sleeve 10 mm chuck that allows for quick and easy bit changes. Here is an overview of the Einhell TE-CD 12/1 X-Li: Powerful 2-speed gearbox: The drill has two speeds, 0-400 RPM and 0-1400 RPM, which can be selected depending on the task at hand. This allows for precise drilling and screwing in a variety of materials. 30 Nm torque: The drill delivers a torque of 30 Nm in 20 torque stages, which is enough power to drill through wood, metal, and plastic. Removable, one-sleeve 10 mm chuck: The chuck allows for quick and easy bit changes. Simply insert the bit into the chuck and tighten the collar. LED work light: The LED work light provides illumination in dark areas, m...
Read more